Where Is 5 mm Titanium Sheet Used in Industrial Equipment?

November 21, 2026

5 mm titanium sheet is used in industrial equipment that faces corrosion, seawater, process chemicals, heat, or weight limits. Common uses include chemical tanks and liners, heat exchanger parts, marine and offshore systems, aerospace housings, and water-treatment machinery. Grade 2 is chosen for corrosion resistance and formability, while Grade 5 is chosen for higher strength. Jucheng Titanium supplies hot-rolled, annealed titanium sheet in thicknesses from 4 mm to 80 mm. This guide covers applications, grades, specifications, fabrication, supplier checks, and cost factors, so buyers can match the sheet to the job before requesting a quote.

5mm Titanium Sheet Product	​​​

 

What Is 5 mm Titanium Sheet?

Basic Definition and Common Product Forms

In terms of thickness, a titanium sheet with a nominal thickness of 5 millimetres is considered to be a mid-gauge flat product. Additionally, it is often annealed and descaled after being hot rolled. In spite of the fact that it is lighter and more cost-effective to manufacture than thick plate, this thickness is robust enough to construct pressure vessel walls and structural brackets. It may be cut to size blanks, mill-size sheets, or CNC-cut parts, according to the customer's preference. You should verify the meanings of sheets and plates in the purchasing specification since they differ from standard to standard.

Common Standards for 5 mm Titanium Sheet

The ASTM B265 standard is the most widely used reference, and it includes titanium strip, sheet, and plate fabrication. For work involving pressure vessels, ASME SB265 is applicable. Ti-6Al-4V sheet that has been annealed is covered by AMS 4911 for use in aerospace, whereas unalloyed titanium is covered by ASTM F67 for use in surgical implants. All four are included in the product information that has been provided. It is important to verify the edition and test criteria before placing a purchase.

Titanium Material Standards	​​​

 

Common Titanium Grades for Industrial Equipment

There are a total of twelve grades of titanium available from Jucheng: Gr1, Gr2, Gr4, Gr5, Gr7, and Gr12. The most common option for corrosion-focused equipment is grade 2, which is considered to be commercially pure. For situations in which strength-to-weight ratio is important, grade 5 is Ti-6Al-4V. Palladium is included in grade 7 because it provides superior resistance to reducing acids. Examine the precise chemistry in comparison to the standard.

Where Is 5 mm Titanium Sheet Used in Industrial Equipment?

Most uses share one trait: repair or replacement is costly, so material life matters. The table lists typical applications and what buyers should check.

Equipment AreaTypical 5 mm PartsCommon GradeMain Check
Chemical processingTank walls, liners, reactor partsGr2, Gr7Acid type, temperature
Heat exchangersTube sheets, platesGr2Water chemistry, pressure
Marine and offshoreHousings, desalination partsGr2Galvanic contact
AerospaceHousings, bracketsGr5AMS 4911, traceability
Medical and laboratoryDevice and instrument partsUnalloyed gradesCertification
Energy and water treatmentCondenser parts, tanksGr2Chlorides, temperature

Grade 2 appears most often because corrosion resistance and weldability matter more than peak strength in these systems. Grade 5 appears where load and weight dominate. Pressure, flow velocity, and contact with dissimilar metals also affect the final choice.

Titanium Industrial Applications	​​​

 

5 mm Titanium Sheet for Chemical Processing Equipment

Chemical plants use 5 mm titanium sheet for tank walls, liners, and reactor parts. Titanium forms a thin, stable oxide film that resists chlorides and many oxidizing acids. Grade 2 is common because it welds and forms well. Review chemical concentration, temperature, and flow velocity against corrosion data before selecting a grade.

5 mm Titanium Sheet for Heat Exchangers and Condensers

At this thickness, tube sheets and heat exchanger plates are near-net-shape applications, which helps to decrease the amount of waste that is produced by machining. Due to the fact that titanium is resistant to saltwater and chloride-containing cooling water, condensers made of titanium may outlive many designs made of stainless steel when the water is salty.

Titanium Heat Exchanger Parts	​​

 

5 mm Titanium Sheet for Marine and Offshore Equipment

Stainless steel will develop pitting as a result of chlorides. Because titanium is resistant to saltwater at room temperature, desalination equipment, seawater skids, and offshore housings may all be made out of titanium sheet measuring 5 millimetres. Take a look at metals that are not related to titanium since galvanic interaction with titanium might hasten the corrosion process on the other metal.

5 mm Titanium Sheet for Aerospace and Medical Equipment

For aircraft housings and brackets that need great strength while maintaining a low weight, grade 5 sheet to AMS 4911 is an ideal material. The ASTM F67 standard may require the use of unalloyed grades for work on medical devices. When it comes to these purchases, accreditation and traceability are quite important.

5 mm Titanium Sheet for Energy, Water Treatment, and Machinery

Power-generation condensers, water-treatment tanks, and machinery housings use titanium where saltwater, wet chlorine, or chemical exposure shortens the life of other metals. Grade 2 is the usual starting point because it welds well, which helps custom fabrication.

Why Do Engineers Choose 5 mm Titanium Sheet?

Corrosion Resistance in Aggressive Environments

A 5 mm titanium sheet builds a TiO2 film less than 10 nanometers thick. The film reforms quickly when scratched in oxygen-bearing environments, protecting against pitting and crevice attack in seawater and many chloride and oxidizing media. It does not make titanium immune to every chemical, so operating conditions must still be verified.

TiO₂ Passive Film Diagram​​

 

Strength-to-Weight Ratio and Service Life

When compared to stainless steel, which has a density of around 8 g/cm3, grade 2 has a density of approximately 4.51 g/cm3. About twice as much specific strength is possessed by titanium as that of 316 stainless steel. A lighter weight decreases the amount of support loads and the amount of effort required for handling, and a longer service life may compensate for a higher price when the costs of replacement or shutdown are considerable.

Fabrication Flexibility for OEM and Custom Equipment

Because it has sufficient thermal mass, the 5 mm gauge is able to disperse heat and maintain its flatness effectively, which helps to prevent oil-canning during the welding process. Through the use of the appropriate methods, the sheet may be cut, shaped, welded, and machined. From the designs provided by the client, blanks and components may be produced to order.

How Should Buyers Compare 5 mm Titanium Sheet With Other Metals?

5 mm Titanium Sheet vs Stainless Steel Sheet

In moderate settings, stainless steel is often more affordable and simpler to get than other materials. In saltwater, 304 may develop pitting, but titanium is resistant to chlorides at temperatures that are considered ambient. Select stainless steel when the surrounding atmosphere is calm. Titanium should be used where pitting, replacement frequency, or weight are the factors that determine overall cost.

5 mm Titanium Sheet vs Aluminum Plate

Aluminium has lower strength, a lower temperature capacity, and poorer resistance in certain chemical and chloride conditions. However, it is lighter and most of the time more affordable than other materials. Despite having a higher density than aluminium, titanium is superior in terms of both strength and resistance to chemical reactions.

Metal Sample Comparison	​​

 

Grade 2 vs Grade 5 Titanium Sheet at 5 mm Thickness

The table compares the two most common grades using supplied technical data.

PropertyGrade 2Grade 5 (Ti-6Al-4V)
TypeCommercially pureAlloy
DensityAbout 4.51 g/cm³About 4.43 g/cm³
Yield strength275 MPa minimum828 MPa or higher
Tensile strength345 MPa minimum895 MPa or higher
Bend radius2T–2.5T (10–12.5 mm)About 4T–5T (20–25 mm), often hot formed
CuttingShearing possibleWaterjet or laser usually needed

Grade 5 has roughly three times the yield strength of Grade 2 but is harder to form and cut. Grade 2 usually fits tanks and liners. Grade 5 fits load-bearing parts and holds structural integrity up to about 400°C.

What Specifications Should Be Checked Before Ordering 5 mm Titanium Sheet?

Thickness, Dimensions, and Tolerance Requirements

The Jucheng Titanium supply range covers thickness from 4 mm to 80 mm, width from 950 mm to 2500 mm, and length up to 10,000 mm, or custom sizes. Specify the standard and edition, thickness tolerance, flatness, squareness, and edge condition. Leveled sheet supports flat waterjet and laser cutting. Buyers who want to confirm sizes or grades can send details to s4@juchengti.com.

Density, Weight, and Mechanical Properties

When density is multiplied by thickness, the result is weight per square metre. Each square metre of Grade 2 weighs around 22.55 kilograms, whereas Grade 5 weighs approximately 22.15 kilograms. Verify the density that is particular to the grade, as well as whether the shipping weights are net or gross. Make sure to ask for the tensile strength, yield strength, and elongation, which should be around 10% for Grade 5.

Surface Condition and Documentation

The standard supply is either acid pickled or annealed and descaled, both of which result in a matte grey surface that is suitable for inspection. Surfaces that have been machined and polished are also included on the list, in addition to rolling, levelling, and surface finishing procedures. In addition to requesting EN 10204 3.1 mill test certificates, you should also request heat-number traceability after cutting. These certificates should detail the melt source, chemistry, mechanical properties, and heat treatment.

Titanium Mill Test Certificate	​​

 

What Are the Fabrication Requirements for 5 mm Titanium Sheet?

Welding Requirements for Titanium Sheet

For welding, use either TIG (GTAW) or plasma. There is no recommendation for stick welding. Due to the fact that contamination causes welds to become brittle, a trailing shield and an argon back-purge are used to keep oxygen and nitrogen away from hot metal materials. There is a need for clean joint preparation as well as qualification processes.

Titanium TIG Welding​​

 

CNC Machining and Cutting Considerations

Titanium's low thermal conductivity concentrates heat at the cutting edge, so machining a 5 mm titanium sheet needs suitable speeds, feeds, tooling, and coolant. Grade 2 can be sheared on heavy industrial shears. Grade 5 usually needs waterjet or laser cutting, and waterjet avoids a heat-affected zone. Laser cutting needs argon or nitrogen assist, because oxygen assist causes brittle alpha case.

Forming, Bending, and Quality Inspection

Grade 2 bends at about 2T to 2.5T radius. Grade 5 needs a larger radius, often with hot forming to limit springback. Match final inspection to pressure, loading, and service risk. XRF testing can confirm grade by detecting aluminum and vanadium in Grade 5.

How Can Buyers Select a Qualified 5 mm Titanium Sheet Supplier?

Supplier Qualifications and Manufacturing Capability

Before verifying the supplier's expertise with ASTM B265, Grade 2, Grade 5, and custom processing, it is necessary to first determine if the supplier is a mill, manufacturer, stockist, or trader. Jucheng Titanium has been in the business of producing, processing, and selling titanium since the year 2004, and it also has research and development and quality inspection teams. Request information on inspection processes, dimensional reports, and the treatment of nonconformance.

Stock Availability and Custom Manufacturing

Throughout the course of the year, the firm maintains a stock of around 3,000 tonnes of titanium and provides individualised manufacture and processing based on the specifications and drawings provided by customers. Please provide written confirmation of the lead times and minimum order quantities for each grade and size product.

Packaging, Logistics, and After-Sales Support

Questions about export packing, shipping documentation, customs procedures, and third-party inspection should be asked by purchasers from the United States. You should look for a provider that has an after-sales staff that can manage claims and technical issues after the product has been delivered.

Titanium Export Packaging	​​

 

How Much Does 5 mm Titanium Sheet Cost?

Factors That Influence 5 mm Titanium Sheet Price

The price is determined by factors such as the grade, size, quantity, surface condition, tolerance, certification, testing, processing, packing, goods, tariffs, and market circumstances. The cost of alloy grades is often higher than that of grade 2. Polishing, cutting, and machining all contribute to the overall cost.

Price per Kilogram vs Price per Square Meter

In addition to per kilogram, per sheet, per square metre, and per completed item, quotations may also be provided. Take the weights listed above and convert them to a single unit before doing a comparison. Verify if the weight is net or gross, as well as whether or not the freight and charges are included.

Cost vs Performance and Quotation Requests

Titanium has the potential to justify a higher initial price by reducing the amount of maintenance, replacement, weight, or shutdowns that are required. Defining the working environment, grade, standard, dimensions, quantity, tolerances, surface condition, certification, inspection, packing, destination, and lead time is necessary in order to get an accurate price. Evaluate several suppliers based on the same standards, and provide final approval of a sample or the first product for essential pieces of equipment.

Conclusion

5 mm titanium sheet is used where corrosion, seawater, heat, or weight make other metals costly to maintain. Typical uses include chemical tanks, heat exchanger parts, marine equipment, aerospace housings, and water-treatment machinery. Grade 2 suits corrosion-focused, formable work, while Grade 5 suits high-strength, lightweight parts but is harder to form and cut. Standards such as ASTM B265, ASME SB265, and AMS 4911 define quality, so dimensions, tolerances, surface condition, and certificates should be confirmed. Welding, laser cutting, and forming require contamination control. Quotes should be compared on the same weight and delivery basis, and lifecycle cost often decides whether titanium offers better value than stainless steel or aluminum.

Titanium Factory Warehouse	​​

 

FAQ

1. Is 5 mm titanium sheet supplied annealed?

Yes. The annealed condition relieves internal stress from rolling and supports dimensional stability during machining.

2. What temperature can Grade 5 sheet handle?

Grade 5 maintains structural integrity up to about 400°C. Verify the limit against your actual loading.

3. What sizes can Jucheng Titanium supply?

Thickness ranges from 4 mm to 80 mm, width from 950 mm to 2500 mm, and length up to 10,000 mm, or customized.

4. Can I order custom-processed parts?

Yes. Customized production and processing are available from customer requirements and drawings, with polished, machined, or acid-pickled surfaces.

Request a Quote for 5 mm Titanium Sheets from Jucheng Titanium

Looking for a 5 mm titanium sheet supplier with multiple grade options, annealed hot-rolled stock, and custom processing? Jucheng Titanium has over 20 years of titanium experience and reports about 3,000 tons of year-round inventory. Send your grade, standard, dimensions, quantity, surface finish, certification needs, drawings, and delivery location, and we will review your requirements and respond with technical feedback and a quotation. Email s4@juchengti.com.

Jucheng Titanium​​

 

References

1. ASTM International. ASTM B265-20a, Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate. 2020.

2. ASME. Boiler and Pressure Vessel Code, Section II, Part B: Nonferrous Material Specifications. 2023.

3. Donachie, M. J. Titanium: A Technical Guide, 2nd Edition. ASM International. 2000.

4. Leyens, C., and Peters, M. (Eds.). Titanium and Titanium Alloys: Fundamentals and Applications. Wiley-VCH. 2003.

5. Schutz, R. W., and Thomas, D. E. "Corrosion of Titanium and Titanium Alloys." ASM Handbook, Volume 13: Corrosion. ASM International. 1987.

6. ASM International. ASM Handbook, Volume 6: Welding, Brazing, and Soldering. 1993.

Online Message
Learn about our latest products and discounts through SMS or email