Which Titanium Sheet Thickness Fits Chemical Processing Equipment?

November 16, 2026

In order to determine the ideal thickness of titanium sheets for use in chemical processing equipment, it is not enough to simply choose a more robust metal for a more demanding application. The chemical concentration, the operating temperature, the internal pressure, the manufacturing requirements, and the mechanical stresses of the equipment are all factors that engineers need to take into consideration. Industrial titanium sheets are available from Jucheng Titanium, a proficient titanium manufacturer located in Baoji, China. These sheets are available in a variety of grades and sizes.

Stacked titanium sheets of different grades​​​​

By gaining a knowledge of thickness and material grade, manufacturers of equipment have the potential to improve corrosion resistance, structural dependability, and long-term operational performance levels. When it comes to the manufacturing of dependable chemical storage tanks, reactors, heat exchangers, and processing vessels, selecting the appropriate titanium sheets is of the utmost importance.

What Factors Determine Titanium Sheet Thickness for Chemical Equipment?

Chemical Composition and Corrosion Conditions

It is important to take into consideration the chemical environment while selecting titanium sheets for use in chemical processing equipment. Copper corrosion may be caused by a wide variety of substances, including chloride solutions, alkalis, acids, and industrial mixtures. The effectiveness of a material is influenced by factors such as temperature, dissolved oxygen, impurities, and chemical concentration. Because of its resistance to corrosion, Grade 2 titanium that is commercially pure is used in a wide variety of applications, including those involving heat transmission and chemical processing. Through the addition of a small amount of palladium, Grade 7 is able to strengthen its resistance to acidic conditions. On the other hand, the corrosion resistance of titanium grades that are not used appropriately is not increased by thicker sheets. Before engineers estimate the conditions of the equipment design and the wall thickness, it is important to determine whether or not the chemicals are compatible.

Titanium corrosion immersion test specimens​​​​

 

Operating Pressure and Mechanical Loads

Internal pressure is a factor that determines the thickness of pressure-retaining components. When it comes to pressure, pressure variations, and mechanical stresses, pressure vessels, chemical reactors, and industrial storage systems are all required to withstand pressure. The minimum wall thickness should be computed by engineers using the design code, the maximum allowable stress for the material, the diameter of the vessel, the joint efficiency, and any other relevant data. The support loads, the conditions of the transportation, the exposure of the equipment, and the local pressures around apertures or connectors are additional considerations. Both throughout the production process and during operation, titanium sheets used for structural components need to be rigid. It is thus the responsibility of engineering calculations to establish the eventual thickness, rather than the sort of equipment.

Temperature and Thermal Cycling

The temperature at which titanium is operated has an effect on its corrosion and mechanical properties. It is necessary to do a material evaluation for every piece of machinery that is subjected to high temperatures, repeated heating and cooling, as well as unexpected temperature variations. Temperature expansion, temperature gradients, and material movement are all processes that have the potential to increase the stress on equipment. It is not enough for engineers to just look at the typical operating conditions; they also need to investigate the maximum design temperature. Grade 2, Grade 5, Grade 7, and Grade 12 titanium grades are all available from Jucheng Titanium to cater to the requirements of various applications. When the appropriate grade and thickness are achieved, the manufacturing of chemical equipment becomes more reliable.

Equipment Geometry and Fabrication Requirements

Both the component shape and the manufacturing method have an impact on the thickness of titanium sheets. Flat covers, cylindrical shells, dished heads, internal partitions, and heat exchanger components all have different mechanical conditions as a result of their construction. Bending, rolling, and welding are all processes that have the potential to influence dimensional accuracy and residual stress. It is possible that pressure-retaining shells will need a thicker plate, whilst supported internal components would require a somewhat thinner sheet. It is important for engineers to examine the forming radii, weld preparation, machining allowances, dimensional tolerances, and component geometry before they finalise the material specification.

Titanium plate bending and welding workshop​​​​

 

Which Titanium Sheet Thickness Is Suitable for Different Applications?

Titanium Sheets for Chemical Storage Tanks

Some of the most common design considerations for chemical storage tanks are the properties of the medium, the capacity of the tank, the operating pressure, and the installation conditions. The diameter of the tank, the liquid head, the support system, and the design requirements all interact to determine the shell thickness of atmospheric tanks. On the other hand, the thickness of the structural shell could be different from that of the internal linings and smaller components. Instead of determining tank thickness generically, manufacturers should do it based on the purpose of the tank. Titanium materials of grade 2 are often used for the storage of chemicals, although grade 7 titanium may be considered for its enhanced resistance to reducing acids. In the final selection, chemical compatibility and mechanical design should be taken into consideration.

	Titanium chemical storage tank​​​​

 

Titanium Sheets for Chemical Reactors

In comparison to storage tanks, the working conditions of chemical reactors are much more challenging. Agitation, changes in temperature, internal pressure, and concentrated process chemicals are all potential sources of stress that might be applied to the vessel wall. In light of this, the thicknesses of the reactor shells, heads, internal baffles, and connectors might vary. Particular attention is required for welded joints and nozzle areas due to the fact that their shape influences the distribution of local stress. Reactor engineers need to define the design pressure, maximum temperature, process chemistry, and manufacturing technique for titanium sheets before they can proceed with the thickness calculation. The process of customising processes to client designs and technical needs is one of the ways that Jucheng Titanium assists equipment manufacturers in properly matching material specifications with production demands.

Titanium chemical reactor​​​​

 

Titanium Sheets for Heat Exchangers

When it comes to heat exchangers, materials made of titanium must be able to withstand chemical conditions on both sides. Titanium is often used in applications involving chemical heat transfer, saltwater, and brackish water because of its resistance to corrosion and outstanding strength-to-weight ratio. The design of the exchanger, the pressure difference, the support system, and the manufacturing process all have an impact on the thickness. Plate components, tube sheets, channel covers, and other structural parts should all have individual thickness criteria that differ from one another. When evaluating thin heat-transfer elements, it is necessary to evaluate both their thermal performance and their mechanical integrity. When it comes to thicker structural components, pressure resistance, rigidity, and connection design are more important considerations.

Chemical equipment application

Main thickness considerations

Material selection considerations

Storage tanks

Liquid head, diameter, structural loads

Grade 2, Grade 7

Chemical reactors

Design pressure, temperature, agitation

Grade 2, Grade 7, Grade 12

Heat exchangers

Pressure differential, thermal performance

Grade 2, Grade 7

Internal partitions

Support spacing, vibration, chemical exposure

Grade 1, Grade 2

Pressure vessel covers

Pressure, stiffness, joint design

Engineering calculation required

Note: This table provides material-selection guidance, not prescribed thickness values. Actual dimensions must be determined through equipment-specific engineering calculations.

Titanium plate heat exchanger components​​​​

 

Titanium Sheets for Chemical Pipelines and Internal Components

Titanium sheets are used in the chemical processing sector for a wide range of applications, including the construction of protective structures, the construction of internal barriers, the construction of baffles, and elements of pipelines. These components are vulnerable to damage from a variety of events, including fluid impact, vibration, localised pressure, and chemicals that are corrosive. A variety of parameters, including geometry, attachment processes, flow conditions, and mechanical support, all have a role in determining thickness. When compared to the structural requirements for an unsupported lid or pressure-retaining component, the requirements for a supported partition in a chemical tank are unique. It is anticipated that the consumers of titanium sheet will offer the designs of the equipment as well as the criteria for its operation. It is feasible that manufacturers will provide suggestions about the dimensions and processing conditions, rather than making assumptions about them based on the names of the products to be manufactured.

How Should You Choose the Right Titanium Grade and Thickness?

Selecting the right titanium sheets for chemical equipment requires careful evaluation of corrosion resistance, mechanical properties, and fabrication conditions. If you need assistance matching titanium grades and dimensions to your project, Jucheng Titanium offers customized material recommendations and processing support. Email s4@juchengti.com with your equipment drawings and technical requirements to explore suitable solutions for your application.

Grade 1 and Grade 2 for General Chemical Applications

Titanium materials of grades 1 and 2, both of which are considered to be commercially pure, are used in industrial applications that need resistance to corrosion. Because of its ability to be formed and its resistance to corrosion, Grade 1 is a suitable option for components that have thin sections and structures that have been constructed. It is a good material for use in chemical equipment, heat exchangers, and storage systems because of its strength and resistance to corrosion. Grade 2 is highly recommended for use in these applications. At the time of grade selection, producers are required to take into account a variety of factors, including mechanical strength, forming procedures, and the environment in which the process is carried out. It is preferable to base the decision of the thickness on the design of the component rather than making the assumption that Grade 1 requires a section that is thicker than Grade 2. Customers who are looking for a wide variety of levels of fabrication flexibility and mechanical performance may choose from any grade that Jucheng Titanium has available to them.

Grade 7 for More Demanding Corrosion Environments

Under reducing conditions, particularly in certain acid-processing environments, the addition of palladium enhances the corrosion resistance of Grade 7 titanium. Titanium sheets made from this grade may be considered for chemical reactors, heat exchangers, and other equipment exposed to aggressive process solutions. However, their suitability depends on factors such as acid concentration, temperature, impurities, and operating conditions. Grade 7 titanium is not immune to corrosion, so a thorough evaluation of the entire process environment is essential before material selection. The same technical principles apply to thickness selection: material grade influences corrosion resistance and mechanical properties, while wall thickness must satisfy structural strength and pressure requirements. Selecting the appropriate combination of titanium grade and thickness helps manufacturers improve equipment reliability and long-term performance.

Grade 12 for Applications Requiring Additional Strength

Molybdenum and nickel are both components of metal grade 12 titanium alloy. When it comes to industrial applications that include crevice corrosion or deposits, its mechanical strength and resistance to corrosion are beneficial advantages. In the event that Grade 2 is not suitable, it may be used for heat exchangers and components utilised in chemical processing. Nevertheless, the material needs to be evaluated in connection with the chemical conditions and the requirements of the design. On account of the fact that an application operates at higher temperatures or pressures, grade 12 is not always the best option. The allowable stresses, manufacturing features, corrosion behaviour, and material availability should all be checked by engineers before the specification is validated.

Titanium grade

Main characteristics

Potential chemical equipment applications

Grade 1

High formability and corrosion resistance

Fabricated components and selected liners

Grade 2

Balanced strength and corrosion resistance

Tanks, reactors, and heat exchangers

Grade 7

Enhanced resistance in certain reducing environments

Acid-processing equipment

Grade 12

Alloyed grade with additional strength and corrosion resistance

Selected heat exchangers and process equipment

Grade 5

High mechanical strength

Special structural components subject to engineering approval

The grades above are not interchangeable. Chemical compatibility and applicable equipment codes must be verified before procurement.

Titanium grade samples display​​​

 

How Can Buyers Specify and Inspect Titanium Sheets Correctly?

Confirm Thickness, Width, Length, and Applicable Standards

The procurement specification needs to contain the following: the grade of titanium, the thickness, the width, the length, the material condition, the standard, and the dimensional tolerances. Customised measures are available for the hot-rolled titanium sheets offered by Jucheng Titanium. These sheets are available in thicknesses ranging from 4 mm to 80 mm, widths ranging from 950 mm to 2,500 mm, and lengths reaching up to 10,000 mm. The ASTM B265, ASTM F67, AMS 4911, and ASME SB265 standards are all included in it. Due to the fact that various standards have varying scopes, purchasers should verify that the standard and edition that are required for their project are appropriate. Drawings and a bill of materials give the manufacturer the ability to evaluate whether or not the dimensions that have been specified can be efficiently furnished and processed.

Review Manufacturing Processes and Surface Quality

In addition to the thickness that is indicated, there are other factors that define the quality of titanium sheet. Pickling, rolling, annealing, and levelling are all operations that contribute to the overall quality of the product. Surface finishing is another technique that falls into this category. It is important for customers to request surfaces that have been polished, machined, or acid-pickled when it comes to the construction of chemical equipment. Concerns like as flatness, edge condition, surface cleanliness, and dimensional limits should be addressed in the technical agreement. It is essential that these concerns be given attention. When it comes to bending, welding, machine-making, or shaping sheets, the circumstances that have been discussed above are quite crucial. Jucheng Titanium places a strong emphasis on maintaining control over the production and processing processes in order to ensure that its products are of the highest possible quality. We provide a variety of services, including chemical composition analysis, verification of mechanical properties, dimensional inspection, and ultrasonic testing, depending on the criteria that are being met.

Titanium plate ultrasonic inspection lab​​​

 

Request Material Certificates and Technical Support

Purchasers should make certain that the material test certifications and inspection records are correct before placing an order for the product under consideration. Investigations of the material's chemical composition and mechanical properties have led to the conclusion that the material that has been provided is appropriate for the requirements. Additionally, in line with the fabrication code and the quality plan for the project, it is possible that the pressure-retaining equipment may need additional inspection and documentation. It is of the highest significance to ensure that there is full and complete traceability between batches of ingredients and final components. More than twenty years of expertise in the production of titanium can be attributed to Jucheng Titanium, which was founded in the year 2004. Titanium is stored at its facilities, which are 120,000 square meters in size, and it is estimated that 3,000 tonnes of titanium are stored there annually. This firm provides assistance to industrial buyers in the process of matching the schedules for the supply of materials and fabrication with the customised manufacturing and processing that is based on the designs of the client.

Provide Complete Project Information Before Ordering

As a result of the supplier doing exhaustive research, they are in a position to suggest a product specification that is more appropriate. The buyers should not only provide a price per tonne, but they should also provide information on the kind of equipment, the chemical medium, the concentration, the operating and design temperatures, the design pressure, the grade, the sheet dimensions, the quantity, and any standards that are relevant. You need to make sure that the requirements for welding, forming, inspection, and surface treatment are all understandable. With the aid of drawings and component specifications, it is feasible to discriminate between pressure-retaining and non-pressure-bearing sections during the building of a heat exchanger or reactor. This may be done in order to make the construction process more efficient.

Conclusion

Choosing the appropriate thickness of titanium sheets for chemical processing equipment requires balancing corrosion resistance, mechanical strength, operating conditions, and fabrication requirements. With a range of material grades, customized dimensions, and professional manufacturing capabilities, Jucheng Titanium helps customers select suitable materials for reliable performance in industrial equipment applications.

Frequently Asked Questions

1. What Is the Standard Thickness of Titanium Sheets for Chemical Equipment?

There is no universal standard thickness. It depends on equipment design, operating pressure, temperature, chemical conditions, and structural requirements.

2. Is Grade 2 Titanium Suitable for Chemical Reactors?

Yes. Grade 2 is widely used in suitable chemical processing environments because of its corrosion resistance and mechanical properties. Compatibility must be verified against the actual process medium.

3. When Should I Choose Grade 7 Titanium Sheets?

Grade 7 is worth considering for certain aggressive chemical environments, particularly reducing acid conditions where additional corrosion resistance is required.

4. What Thickness Range Does Jucheng Titanium Supply?

Jucheng Titanium supplies titanium sheets with thicknesses ranging from 4 mm to 80 mm, with customized dimensions available according to project requirements.

Get Customized Titanium Sheets for Your Chemical Processing Project

Looking for reliable titanium sheets for reactors, storage tanks, or industrial heat exchangers? Jucheng Titanium provides multiple grades, customized dimensions, and professional technical support. Contact our team at s4@juchengti.com to discuss your drawings, material requirements, and project specifications. Let us help you find the right titanium solution.

Jucheng Titanium​

​​

 

References

1. ASTM International. ASTM B265-25: Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate. ASTM International, 2025.

2. ASME. ASME Boiler and Pressure Vessel Code, Section VIII, Division 1: Rules for Construction of Pressure Vessels. American Society of Mechanical Engineers.

3. Titanium Metals Corporation (TIMET). Designing with Titanium: Titanium Design and Fabrication Handbook for Industrial Applications. TIMET.

4. Titanium Metals Corporation. Titanium Handbook: Design and Fabrication of Titanium for Chemical Process Equipment. Technical handbook.

5. Young, Chuck. The Use of Titanium for Heat Transfer in the Chemical Processing Industry. Tricor Metals, Special Topic – Chemical & Petrochemical.

6. American Society of Mechanical Engineers. ASME SB-265: Titanium and Titanium Alloy Strip, Sheet, and Plate. ASME.

Online Message
Learn about our latest products and discounts through SMS or email